Safety instructions

Safety instructions Safety data sheet according to 1907/2006 / EC, Article 31 Printing date: 10.12.2013 Revision: 10.12.2013 Version number 137.1.26

1 Identification of the substance / mixture and of the company / undertaking Product identifier Trade name: Lumea Liquid Wax Candles CAS Number: 90622-46-1 EC Number: 292-448-0

Relevant identified uses of the substance or mixture and uses advised against No further relevant information available. ·

Application of the substance / the preparation Fuel Details of the supplier of the safety data sheet Manufacturer / supplier AMB - Lighting Europe B.V Photographer 4 NL-6921 RJ Duiven Nederland Tel. +31 85 484 2018 webshop@tafel Verlichting.nl

Information sector: Tel. +31 85 484 2018 webshop@tafel Verlichting.nl

Emergency telephone number Poison Information Center Berlin Tel. +49 (0) 30 30686 790 Advice in German and English

2 Hazards identification Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 GHS08 health hazard

Asp. Tox. 1 H304 May be fatal if swallowed and enters airways · Classification according to Directive 67/548 / EEC or Directive 1999/45 / EC Xn; Harmful

R65: Harmful: may cause lung damage if swallowed. R66: Repeated exposure may cause skin dryness or cracking. Information pertaining to particular dangers for man and environment: In case of prolonged or repeated contact with the skin, dermatitis (skin inflammation) can occur due to the degreasing effect of the solvent.

Hazard-determining components for labeling:

Alkanes, C14-16Hazard statements H304. May be fatal if swallowed and enters airways. Precautions P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER or physician. P331 DO NOT induce vomiting. P405 Store locked up. P501 Dispose of contents and container in accordance with local / regional / national / international regulations. Additional information: EUH066 Repeated exposure may cause skin dryness or cracking. Other hazardsResults of PBT and vPvB assessmentPBT: Not applicable. VPvB: Not applicable.

3 Composition / information on ingredients · Chemical characterization: Substances · CAS-No. Description 90622-46-1 Alkanes, C14-16 Identification number (s) EC number: 292-448-0

4 First aid measures

Description of first aid measures.

After inhalation: Supply fresh air; consult doctor in case of complaints. · After skin contact: Wash off with soap and water. If skin irritation remains, consult a doctor. After eye contact: Rinse eyes with open eyelid for several minutes with running water If complaints persist, contact a doctor. After swallowing: DO NOT induce vomiting to avoid lung entry. Rinse mouth and see a doctor immediately. Information for doctor: · Most important symptoms and effects, both acute and delayed No further relevant information available. Hazards Can enter lungs if swallowed or vomited. Inhalation can lead to pulmonary edema or pneumonia. Indication of any immediate medical attention and special treatment needed No further relevant information available. 5 Fire-fighting measures · Extinguishing media · Suitable extinguishing agents: CO2, extinguishing powder or water spray. Fight larger fires with water jet. For safety reasons unsuitable extinguishing agents: Water with full jet. Special hazards arising from the substance or mixture. Can form explosive gas-air mixtures. Do not inhale explosive or flue gases. Carbon monoxide can be released during incomplete combustion. Advice for firefighters Protective equipment: Wear self-contained respiratory protective device. Additional information Water spray can be used to flush away the ignition source. Vapors can form explosive atmospheres with air.

6 Accidental release measures · Personal precautions, protective equipment and emergency procedures Keep away from ignition sources. Provide adequate ventilation. Do not breathe vapor. Particular risk of slipping due to leaked / spilled product. Environmental precautions: Must not be allowed to enter drains or wastewater. Inform the competent authority in case of penetration into wastewater or sewage. Methods and material for containment and cleaning up: Take up with absorbent material (sand, mountain flour, acid binder, universal binder). Dispose of contaminated material as waste according to item 13. Provide adequate ventilation. Reference to other sections Information on safe handling - see chapter 7. Information on personal protective equipment - see chapter 8. Information on disposal - see chapter 8

7 Handling and storage

Vapors are heavier than air, they crawl along the floor and can rebound over long distances when ignited. Keep away from ignition sources or open flames. Conditions for safe storage, including any incompatibilities Storage: Requirements to be met by storage area and container: Keep only in the original container. Keep storage temperature between 8 ° C and 38 ° C. Store cool and dry in tightly closed containers. Information about storage compatibility: Do not store with acids. Store away from oxidizing agents. Further information about storage conditions: Keep container tightly closed. Specific end use (s) Fuel

8 Exposure controls / personal protection

Control parametersComponents with limit values ​​that require monitoring at the workplace: Not applicable. Additional information: The lists valid during the compilation were used as basis. Exposure controls · Personal protective equipment: · General protective and hygienic measures: Keep away from food and drink. Wash hands before breaks and at the end of work. Respiratory protection: In case of brief exposure or low pollution use respiratory filter device; with intensive resp. Long exposure use a self contained breathing apparatus from the surrounding air. Filter A / P2 · Protection of hands: Protective gloves are only required in case of frequent and / or prolonged skin contact with the product. Material of gloves Select the glove material on consideration of the penetration times, rates of diffusion and the degradation. · Penetration time of glove material At a layer thickness of 0.11 mm the penetration time is> 480 min. · For the permanent contact gloves made of the following materials are suitable: Nitrile rubber · Eye protection: It is recommended to use safety glasses when re-molding.

9 Physical and chemical properties

Information on basic physical and chemical properties · General Information · Appearance: · Form: Liquid · Color: Colorless · Odor: Mild · Odor threshold: Not determined. · PH-value at 20 ° C: 7 Change in condition · Melting point / Melting range: ~ 10 ° C · Boiling point / Boiling range: 200 ° C · Flash point: 121 ° C · Flammability (solid, gaseous): Not applicable. Ignition temperature: ~ 216 ° C Decomposition temperature: Not determined. Self-igniting: Not determined. Explosion hazard: Product does not present an explosion hazard. Explosion limits: · Lower: 0.5 Vol% · Upper: 7 Vol% · Vapor pressure: Not determined. · Density at 20 ° C: 0.77 g / cm³ Solubility in / Miscibility with · Water: Not resp. difficult to mix. Partition coefficient (n-octanol / water) at 20 ° C: ≥ 6 Viscosity · Kinematic at 40 ° C: 2.5 cSt · Other information No further relevant information available.

10 Stability and reactivity

Reactivity · Chemical stability · Thermal decomposition / conditions to be avoided: No decomposition if used as directed. Possibility of hazardous reactions No dangerous reactions known. Conditions to avoid No further relevant information available. Incompatible materials: Oxidizing agents, strong acids Hazardous decomposition products: Not applicable if used in accordance with regulations and stored in accordance with regulations.

11 Toxicological information

Information on toxicological effectsAcute toxicity: LD / LC50 values ​​that are relevant for classification: 90622-46-1 Alkanes, C14-16 Oral LD50> 5250 mg / kg (Rat) Dermal LD50> 2000 mg / kg (Rabbit) Primary irritant effect: On the skin: No irritating effect. On the eye: No irritating effect. Sensitization: No sensitizing effect known. Additional toxicological information: Smallest amounts entering the lungs if swallowed or vomited may cause pulmonary edema or pneumonia.

12 Ecological information

Toxicity · Aquatic toxicity: No further relevant information available. Persistence and degradability No further relevant information available. Other information: There are no data available on the mixture. Behavior in environmental systems: Bioaccumulative potential No further relevant information available. Mobility in soil No further relevant information available. Additional ecological information: General notes: Water hazard class (NL) 11: Slightly harmful to aquatic organisms. Hazardous to water class 1 (D) (Self-assessment): hazard to water small Do not discharge undiluted or in large quantities into groundwater, into surface water or into the sewage system. Results of PBT and vPvB assessment PBT: Not applicable. VPvB: Not applicable. Other adverse effects No further relevant information available.

13 Disposal Considerations

Waste treatment methods Recommendation: Waste treatment methods · Recommendation: Must not be disposed of together with household waste or enter drains. The waste codes listed are recommendations based on the likely use of the product. European waste catalog 07 00 00 WASTES FROM ORGANIC CHEMICAL PROCESSES 07 07 00 wastes from the MFSU of fine chemicals and chemical products not otherwise specified 07 07 04 * other organic solvents, washing liquids and mother liquors 13 00 00 OIL WASTES AND WASTES FROM LIQUID FUELS (excluding edible oil and under Chapters 05, 12 and 19 (covered by oils) 13 07 00 liquid fuel wastes 13 07 03 * other fuels (including mixtures) · Uncleaned packaging: · Recommendation: Dispose of in accordance with official regulations.

14 Transport information

UN numberADR, ADN, IMDG, IATA Void UN proper shipping nameADR, ADN, IMDG, IATA Void Transport hazard class (es) ADR, ADN, IMDG Class Void IATA Class Void Not Restricted · Packing group: · ADR, IMDG, IATA Void · Environmental hazards: · Marine pollutant: No · Special precautions for user Not applicable. Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code Not applicable. UN "Model Regulation": -

15 Regulations

· Safety, health and environmental regulations / legislation specific for the substance or mixture · Labeling according to Regulation (EC) No 1272/2008 The substance product is classified and labeled according to the CLP regulation. (Continued on page 8) BE / NL · Hazard-determining components for labeling: Alkanes, C14-16 · Hazard statements H304 May be fatal if swallowed and enters airways. Precautionary statements P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor. P331 DO NOT induce vomiting. P405 Store locked up. P501 Dispose of contents and container in accordance with local / regional / national / international regulations. Chemical safety assessment: A chemical safety assessment has not been carried out.

16 Other information

These data are based on the current state of our knowledge. However, they do not describe any warranty of product properties and do not establish any contractual legal relationship. Issuing sector data sheet: The safety data sheets were produced together with DEKRA Consulting GmbH, Hanomagstr. 12, D-30449 Hannover, Germany, Tel .: + 49.511.42079-311, reach@dekra.com, drawn up. Abbreviations and acronyms: ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International Carriage of Dangerous Goods by Road) IMDG: International Maritime Code for Dangerous Goods IATA: International Air Transport Association GHS: Globally Harmonized System of Classification and Labeling of Chemicals EINECS: European Inventory of Existing Commercial Chemical Substances CAS: Chemical Abstracts Service (division of the American Chemical Society) LC50: Lethal concentration, 50 percent LD50: Lethal dose, 50

** Strictly for business use **